| 家住高层，谨防电气火灾！ |
| 添加时间：2019/9/19 14:35:39 浏览次数： |
| 01 01 对用电线路进行巡视，以便及时发现问题。 Inspection of power lines in order to find problems in time. 02 02 在设计和安装电气线路时，导线和电缆的绝缘强度不应低于网路的额定电压，绝缘子也要根据电源的不同电压进行选配。 In the design and installation of electrical lines, the insulation strength of wires and cables should not be lower than the rated voltage of the network, and insulators should be selected according to the different voltage of the power supply. 03 03 安装线路和施工过程中，要防止划伤、磨损、碰压导线绝缘，并注意导线连接接头质量及绝缘包扎质量。 During installation and construction, scratch, abrasion and bump insulation of conductors should be prevented, and the quality of connection joints and insulation wrapping of conductors should be paid attention to. 04 04 在特别潮湿、高温或有腐蚀性物质的场所内，严禁绝缘导线明敷，应采用套管布线，在多尘场所，线路和绝缘子要经常打扫，勿积油污。 In places with special humidity, high temperature or corrosive substances, it is strictly forbidden to lay insulated conductors open. Casing wiring should be adopted. In dusty places, lines and insulators should be cleaned regularly and oil pollution should not be accumulated. 05 05 严禁乱接乱拉导线，安装线路时，要根据用电设备负荷情况合理选用相应截面的导线。并且，导线与导线之间，导线与建筑构件之间及固定导线用的绝缘子之间应符合规程要求的间距。 It is strictly forbidden to pull the wires in disorder. When installing the wires, the wires with corresponding sections should be selected reasonably according to the load of the electrical equipment. Moreover, the spacing between conductors and conductors, between conductors and building components, and between insulators for fixed conductors should meet the requirements of regulations. 06 06 定期检查线路熔断器，选用合适的保险丝，不得随意调粗保险丝，更不准用铝线和铜线等代替保险丝。 Regular inspection of line fuses, the selection of appropriate fuses, not arbitrary adjustment of the fuse, let alone the replacement of fuses with aluminum and copper wires. 07 07 检查线路上所有连接点是否牢固可靠，要求附近不得存放易燃可燃物品。 Check whether all connection points on the line are solid and reliable. It is required that flammable and combustible goods should not be stored nearby. |
| 上一页 智慧用电与电气火灾监控系统的本质区别 |
| 下一页 当导线过负荷时，加快了导线绝缘层老化变质 |
Copyright © 技术支持：遨游网络