保定电气厂-电气火灾探测器厂家

根据火灾探测器对不同火灾参量的响应，可分为感温、感烟、感光、复合和可燃气体等五种。电气火灾监控探测器是一种独立式的智能型探测器。能通过内置电路及软件对下级终端探头传递过来的信号进行智能分析处理，由此可判断出下级终端每一只探头的状态（即故障状态、火灾报警状态、正常工作状态），适用在电气火灾发生机率相对较大的工厂、大型库房、办公室、商业建筑、宾馆、住宅及娱乐场所等场所中。注意安装应放在通风、开阔、不产生妨碍的地方，远离白炽灯等电源，远离厨房排气孔，一般是天花板顶中央、墙壁高处中央等地。

According to the response of fire detector to different fire parameters, it can be divided into five kinds, such as temperature sensing, smoke sensing, photosensitivity, compound and combustible gas. The electric fire monitoring detector is an independent intelligent detector. The signal through the built-in circuit and software of the lower terminal probe to pass over the intelligent analysis and processing, which can determine the lower terminal of each probe state (i.e. fault state, fire alarm state, the normal working state), applicable in electrical fire occurrence probability is large factories, large warehouse, office and commercial buildings, hotel, residential and entertainment places. Attention should be placed on ventilated, open and non obstructing places, away from incandescent lights and other power sources, away from kitchen exhaust holes, usually in the center of the ceiling, the center of the wall, the center and so on.