电气火灾探测器使用方法
Use method of electric fire detector
电气火灾监控探测器是智能型探测器产品，该产品既可以大量的联机使用，也可以独立式使用（具有漏电/过流/温度/过压/欠压/缺相/偏移/的检测 和报警功能，另有可选功能：报警时能自动切断被监控电路，即具有继电器输出功能）。它集电气火灾监控探测及报警功能于一体，具有高智能化、功能齐全、性能可靠、迷你设计、外形美观、设定简单、仪表式安装等特点。是令人耳目一新的全新思路设计的结晶，是对防范电气火灾事故的又一新贡献。
The electric fire monitoring detector is an intelligent detector product. The product can be used in a large number of on-line applications and can be used independently (with leakage / overcurrent / temperature / overvoltage / undervoltage / undervoltage / offset / offset / alarm function, and the optional function: the monitored circuit can be automatically cut off when the alarm is reported, that is, the output power of the relay. Yes. It integrates the functions of electric fire monitoring and detection and alarm. It has the features of high intelligence, complete function, reliable performance, mini design, beautiful appearance, simple setting, instrument installation and so on. It is a new and innovative design of new ideas and a new contribution to the prevention of electric fire accidents.
电气火灾监控探测器（以下简称“监控探测器”）由剩余电流互感器、温度传感器和监控报警器组成，当被保护线路中的剩余电流互感器（以下简称“互感器”）探测到的剩余电流超过监控报警器的预设定值或温度传感器探测到的温度超出预设定值时，监控报警器经分析、确认后发出声光报警信号和控制信号。监控报警器能显示报警线路、泄漏电流大小，传感器温度等。当监控报警器有报警信息时，启动继电器。本监控探测器带有4路剩余电流互感器和4路温度传感器，可以直接显示探测电流值和温度值，无需占用大的设备场地，节省消防设备成本，节约电力能源，监控探测器采用仪表安装方式。
The electric fire monitoring detector (hereinafter referred to as "monitoring detector") consists of the residual current transformer, temperature sensor and monitoring alarm. The residual current detected by the residual current transformer (hereinafter referred to as "transformer") in the protected line exceeds the pre set value of the monitoring alarm or the temperature sensor detection. When the temperature exceeds the preset value, the alarm alarm and control signals are issued after analysis and confirmation. The monitoring alarm can display alarm line, leakage current, sensor temperature and so on. When monitoring alarm has alarm information, start the relay. The monitoring detector has 4 channels of residual current transformer and 4 road temperature sensors, which can directly display the value of detection current and temperature. It does not need to occupy large equipment site, save the cost of fire equipment, save the power of power, and use the instrument installation method for monitoring detector.